top glued on...
then I worked out where I'd cut it and made a routing guide.....
binding channel routed....
routing guide clamped in place...
bearing cutter lined up for same depth as binding channel
and routed...
binding to follow!!
Subscribe to:
Post Comments (Atom)
Blog Archive
-
▼
2009
(104)
-
▼
March
(13)
- bits & pieces going on.the mando is done but for a...
- Endpin preamp into the pew guitar.....Tuners onto ...
- tuners on the pew guitarand the bridge where it wi...
- both zouks and the pew build have had a few coats,...
- first zouk has 3 coats on now.....another couple t...
- Church pew guitar....neck glued on, heel cap glued...
- some work on the zouks.one neck rough carved, mark...
- finished the pickup in mando #42. It'll be in the...
- Some sanding done today which doesn't look at all ...
- Once the tape comes off, it's over to the sander t...
- mando arm bevel progress...top glued on... then I ...
- so zouks.....binding channel in top cut...step cut...
- 1st zouk top braced and fitted......two necks glue...
-
▼
March
(13)
Links
About Me
- Martinedwards
- Married with 4 kids, Christian, worship leader, luthier
No comments:
Post a Comment