some more neck work on the Pew guitar.
fret marker dots on & cut the profile then started sanding.
the headstock needs a fair bit of work too..... and the neck joint is barely started.
nowhere near done yet, but on the road at least......
Tuesday, March 10, 2009
finished the pickup in mando #42. It'll be in the post tomorrow, all being well.
some more neck work on the Pew guitar.
fret marker dots on & cut the profile then started sanding.
the headstock needs a fair bit of work too..... and the neck joint is barely started.
nowhere near done yet, but on the road at least......
some more neck work on the Pew guitar.
fret marker dots on & cut the profile then started sanding.
the headstock needs a fair bit of work too..... and the neck joint is barely started.
nowhere near done yet, but on the road at least......
Subscribe to:
Post Comments (Atom)
Blog Archive
-
▼
2009
(104)
-
▼
March
(13)
- bits & pieces going on.the mando is done but for a...
- Endpin preamp into the pew guitar.....Tuners onto ...
- tuners on the pew guitarand the bridge where it wi...
- both zouks and the pew build have had a few coats,...
- first zouk has 3 coats on now.....another couple t...
- Church pew guitar....neck glued on, heel cap glued...
- some work on the zouks.one neck rough carved, mark...
- finished the pickup in mando #42. It'll be in the...
- Some sanding done today which doesn't look at all ...
- Once the tape comes off, it's over to the sander t...
- mando arm bevel progress...top glued on... then I ...
- so zouks.....binding channel in top cut...step cut...
- 1st zouk top braced and fitted......two necks glue...
-
▼
March
(13)
Links
About Me
- Martinedwards
- Married with 4 kids, Christian, worship leader, luthier
No comments:
Post a Comment