mandola progress.

Both necks are rough carved but still have a load of sanding to do.

the fretboards are curved to a radius of 12" using a handy curved sanding block from Stewmac (note the 12!!). there was still a fair bit to do on this one when I took the pic.......

I've cut the mortice in the neckblock to accept the tenon on the neck and drilled the holes for the bolt which will pull everything tight,

BUT

because the fretboard is too long I cant reach past it to tighten the bolt.

So,

I need a decision from Kevin (the client) as to how he wants the neck to end at the soundhole.

left square, rounded or a swirl?