Friday, March 26, 2010

cherry OM.

tuners fitted....

Photobucket

and now a choice of tail pieces.....

chrome?

Photobucket

or brass?

Photobucket
#60 edges trimmed... it starts to look like a guitar!!

Photobucket

walnut tail wedge

Photobucket

to match the walnut bindings

Photobucket

and the neck profile cut.

Photobucket

Thursday, March 25, 2010

another few coats of finish onto the Cherry OM. Looks the same, so no pics!!

carved the bracing on #60

Photobucket

and then glued on the top.

no you CAN'T have too many clamps!

Photobucket

Wednesday, March 24, 2010

#60... bridge plate glued in...

Photobucket
banjo refit.......

new neck complete and fitted.....

Photobucket

Photobucket

and here's a very happy looking Joshua!!

Photobucket

Tuesday, March 23, 2010

Banjo rebuild.

This mandolin banjo came my way via freecycle. wonderfully free of charge, but needing a LOT of work.

Photobucket

The neck angle is all off and the glue joint between the sides and the back has let go.

Photobucket

Photobucket

My PLAN at this stage is to keep the one piece drum section, repair the pot (the wooden surround) and fit a longer 4 string tenor neck, so that my #2 son who plays cello will have another instrument with the same tuning........ Worst case scenario is that the pot doesn't hold up and I'll have to make another one from scratch.

so, first it comes easily apart with the aid of a screw driver

Photobucket

then re glue the back & sides joint. I also added a L shaped block of wood to provide extra support when the neck goes back on.

Photobucket

and the neck is a piece of beech I had in the stash. I decided on a 550mm scale length..... there's probably a good reason for that....... anyway, the fretboard is East Indian rosewood. I have a drawer full of strat tuners so this will have a 4 on a side headstock.

Photobucket
#60.....

back braces carved and fitted, back & sides attached.

Photobucket

the neck was a 3 piece blank left over from a build a while back. maple centre and mahogany on the sides. rosewood fretboard glued on after milling out the trussrod slot and sanding the angled headstock.

Photobucket

top bracing fitted.

Photobucket

Monday, March 22, 2010

After playing around with 3 sizes of Mother of Pearl dots, Glen came up this design.

still needs a little sanding, but looking good so far!

Photobucket
#60......

Variable scale fretboard cut.......

647mm & 610mm.....


Photobucket

and laid on the top to work out the bridge angle.....

Photobucket

linings on.....

Photobucket

back bracing on....

Photobucket

Thursday, March 18, 2010

It's pay it forward time again!!

for those folks who are new to my blog, I try to give away a guitar or mando every year, as a tithe, giving it back as it were. I get a LOAD of my wood for free, from church pews and skips (dumpsters) so it seems only fair to make something every now & then to give away.

Hopefully this will be finished by the summer when I'll be attending a few Christian festivals & conferences. Last time I did this I found a wonderful young woman who sang like an angel and played a cheap nylon stgrung guitar. it was an absolute pleasure to hand over a steel strung acoustic when she had no idea that it was up for grabs. the idea is that this will be given to someone at one of the things I'm at in the summer and I trust God to guide them to me and let me see that they're the "one" when it happens.

anyway, this will be a mahogany/engleman 00 sized acoustic with a pair... maybe three.... soundports on the top edge and none on the front. some sort of pickup system.......

anyway, here we go!!!!

the top..... Engleman spruce.

Photobucket

the back...... Mahogany.

Photobucket

the sides...... Mahogany

Photobucket

Wednesday, March 17, 2010

Cherry OM.... lots of sanding and a first coat of lacquer.......

Photobucket

cutaway jumbo....

tuners on, nut cut.....

Photobucket

bridge placed using my handy dandy bridge jig

Photobucket

bridge glued in place (in case?)

Photobucket

bridge pin holes reamed out. strings on!!

Photobucket

LOADS of setup to do, including replacing the nut as I took the high E too deep..... but I'll leave it under tension for a few days before I get to it.

Thursday, March 11, 2010

LOTS of body sanding on the OM and then the neck mortice cut

octave mandolin luthier

tuner holes drilled and some more neck shaping

octave mandolin luthier

then the body and neck permenantly brought together.....

octave mandolin luthier

Wednesday, March 10, 2010

Glen's Les Paul neck work.....

lots of shaping on the sander.....

Photobucket

Photobucket

and the fretboard radius is under way.....

Photobucket

still a good bit to go, but visible progress made each time!!
Cherry OM fret dots.....

holes drilled

luthier octave mandolin

filled

luthier octave mandolin

sanded

luthier octave mandolin

and fretted.

luthier octave mandolin

body binding on

luthier octave mandolin

and a mock up of how it'll look once it's all joined up.......

luthier octave mandolin

Monday, March 08, 2010

jumbo bridge, slotted and drilled

Photobucket

then shaped a little too......

Photobucket

Cherry OM.....braces carved and top glued on.
Photobucket

Blog Archive

About Me

Married with 4 kids, Christian, worship leader, luthier