Sunday, December 21, 2008

Rosette cut out in leopardwood. this is an ofcut from a guitar I built a while ago....


inset and with the black & white strips around the leopardwood, but before planing it all smooth


once the bracing is in, I glue in a support plate behind the soundhole. this is a Lowden thing to help support the wood around the soundhole and strengthen things .


then the bridge plate to stop the ball ends of the strings chewing up the soft top wood.


And that's it for a couple of weeks as it's now the Christmas holidays and I'm locked out of school til the 5th of Jan. (yes, I KNOW it sounds a bit churlish to complain about 2 weeks of enforced holiday, but I was really "in the zone" with these two mandos!!!

still, I need to order the fretboards, tuners & tailpieces from the US and I want to let the dust settle on the Postal service before I do.

Other news is I have another commission for a similar A4 (only more fancy binding) to start when I get back, so while I'm waiting for the US order to arrive I can get it caught up to the same stage as these two.

I'm ALSO negotiating a Bouzouki based on a Sobell guitar bodied zouk for a guy locally and there is a cutaway mando on ebay at the minute so life isn't dull!!

Have a Happy Christmas everyone, and please try to remember that while a dog isn't just for Christmas, it's for life.........a hamster's for 2 years tops!!

and that, well, the whole Christmas thing is to celebrate the birth of Jesus, not the killing of a couple of million Turkeys.

God Bless, see you in JAnuary.
On the dread mando, the back is jointed & rough cut...


and the bracing glued to the back.


once the braces are carved the back is glued onto the sides and the linings can be glued to the top edge.

top planed, braced and the soundhole cut out.....


then after the braces are carved the top glued onto the body


you CAN'T have too many clamps!!


then trim the rough edges and sand, ready to cut the binding channels.

Progress on the A4 (#41)

Cedar top jointed and cut out roughly


Cutting the rosette with a tank cutter...


then a disc of solid wood glued into the slot.... (mahogany in this case to match the back & sides)


then some black & white purfling in the gap between the disc and the edges of the slot.


Tuesday, December 16, 2008

BUSY day!!

I love the last week of term. the kids are all watching a DVD in the other room so I have loads of time to get to work on some mandos!!

first up, the top linings on the A4..

once this is dry it's ready for the cedar top.

and a dread shaped mando. the sides bent into moulds. this mould made from a pic of a 1960s Gibson Dove guitar.

the two halves joined......

Neck & tail blocks glued in place

And linings on one side.

Tomorrow I'm HOPING to get the rosette started on the A4, and the back braced & glued onto the mini dread

Saturday, December 13, 2008

A4 #3

back brace in mahogany to match the back. the glued edge was carved to a curve to bow the back outwards.

and again as many clamps as it takes to hold while glueing.

the top linings will be glued in place and the top fitted before the frame is taken off. then I can trim the excess around the sides to make it start to look like a mando.
A4 cont.

sides in the completed frame

tail block shaped to match the curve and glued in place. No, you CAN'T have too many clamps!!

kerfed linings glued into place around the rim. I prefer to put the kerfs against the side rather than away from the side. this (in my humble opinion) is stronger when planing the top edge to provide a glueing surface for the back or top. Any time I've glued them in with the kerfs outward (as is traditional) I always manage to break a few. Is having the clothes peg alternate colours a bit anal retentive? maybe I have issues.......

so, the back. using the original outline. I already had this back joined and "resting" in the store.....

and roughly cut out with the band saw

SO the mando sold on Ebay, so I have some pennies in the kitty to buy some new parts for later builds..... I have my eye on a fanned fret acoustic guitar, but it'll have to wait, because of the interest generated by the sale of the mando on Ebay. I have 4 negociated commissions and another guy thinking about it. No deposits yet, and of course, with the credit crunch there's every possibility that some (or all) of them may cancel, but still, looks like a busy few months ahead.

The 3 builds that are pretty much agreed are a guitar shaped bouzouki in Rosewood, a mando based on a Gobson Dove acoustic and a A4 style mando.

for each I'm going to have to make new moulds and as a mould is just some MDF or ply sheet I decided to get the A4 under way, even though there's no formal agreement yet......

My technique is to find a straight on pic from the net and using a data projector, throw the image onto a screen. zoom until the scale is right, then draw round it and cut it out. 6this is a 1906 Gibson A4

then cut out the mould from MDF. as a mando is so thin it only needs one thickness of 25mm sheet. guitars need a thicker mould.

once they're cut I clamp them together and sand them smooth on the inside to ensure symetry.

here are the unbent mahogany sides

and now bent & clamped to allow the wood to dry again overnight. note the neck & tail blocks to the left.

Thursday, December 04, 2008

a conversation with a pal got out of hand recently and in a week I threw together this mandostrat.

the body is solid ash, neck maple, fretboard East Indian Rosewood. the pickup is half a precision bass style split pickup, and the bridge was canabalised from a squier strat.

this pic shows it in proportion with an archtop.....

and here's me rockin'!!

OK gang, heres a pair of cherry mandos that I've just finished. cherry back, sides & rosette, Engleman spruce tops, mahogany necks & East Indian Rosewood fretboards. one has edge fret markers and rosewood binding, the other has MOP dots and maple binding.

The rosewood bound one is for a work collegue's husband for christmas and the other is on Ebay at this very moment.......

Blog Archive

About Me

Married with 4 kids, Christian, worship leader, luthier